Skip to content

CVE-2024-5535 SSL_select_next_proto buffer overread

CriticalCVSS 9.1 EPSS 6.1%
Published
Updated
Exploit status
No public exploit known

Description

Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.

Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.

The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).

This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.

In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.

This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available.

Affected products

ProductAffected versionsFixed in
Microsoft azure linux < 3.3.0-2 3.3.0-2
Microsoft cbl mariner < 38.0.72.2-3 38.0.72.2-3
Microsoft cbl mariner < 1.1.1k-35 1.1.1k-35
Microsoft defender for endpoint < 1.0.7001.0101 1.0.7001.0101
Microsoft defender for endpoint < 1.1.58140101 1.1.58140101
debian/openssl(Debian:12) < 3.0.15-1~deb12u1 3.0.15-1~deb12u1
debian/openssl(Debian:12) = 3.0.10-1 No fix listed
debian/openssl(Debian:12) = 3.0.10-1~deb12u1 No fix listed
debian/openssl(Debian:12) = 3.0.11-1 No fix listed
debian/openssl(Debian:12) = 3.0.11-1~deb12u1 No fix listed
debian/openssl(Debian:12) = 3.0.11-1~deb12u2 No fix listed
debian/openssl(Debian:12) = 3.0.12-1 No fix listed
debian/openssl(Debian:12) = 3.0.12-2 No fix listed
debian/openssl(Debian:12) = 3.0.13-1~deb12u1 No fix listed
debian/openssl(Debian:12) = 3.0.13-1~deb12u2 No fix listed
debian/openssl(Debian:12) = 3.0.14-1~deb12u1 No fix listed
debian/openssl(Debian:12) = 3.0.14-1~deb12u2 No fix listed
debian/openssl(Debian:12) = 3.0.9-1 No fix listed
debian/openssl(Debian:13) < 3.3.2-1 3.3.2-1
debian/openssl(Debian:14) < 3.3.2-1 3.3.2-1
ubuntu/edk2(Ubuntu:22.04) < 2022.02-3ubuntu0.22.04.4 2022.02-3ubuntu0.22.04.4
ubuntu/openssl(Ubuntu:22.04) < 3.0.2-0ubuntu1.17 3.0.2-0ubuntu1.17
ubuntu/nodejs(Ubuntu:22.04) All versions No fix listed
OpenSSL >= 3.3.0, < 3.3.2 3.3.2
OpenSSL >= 3.2.0, < 3.2.3 3.2.3
Show 61 more
ProductAffected versionsFixed in
OpenSSL >= 3.1.0, < 3.1.7 3.1.7
OpenSSL >= 3.0.0, < 3.0.15 3.0.15
OpenSSL >= 1.1.1, < 1.1.1za 1.1.1za
OpenSSL >= 1.0.2, < 1.0.2zk 1.0.2zk
Siemens RUGGEDCOM RST2428P < V3.1 V3.1
Siemens SCALANCE XCM-/XRM-/XCH-/XRH-300 family < V3.1 V3.1
Siemens SIDIS Prime < V4.0.700 V4.0.700
Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP >= V3.1.0, < V3.1.5 V3.1.5
Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP >= V3.1.0, < V3.1.5 V3.1.5
Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem < V1.1.1 V1.1.1
Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP >= V3.1.0, < V3.1.5 V3.1.5
ubuntu/edk2(Ubuntu:24.04) < 2024.02-2ubuntu0.6 2024.02-2ubuntu0.6
ubuntu/openssl(Ubuntu:24.04) < 3.0.13-0ubuntu3.2 3.0.13-0ubuntu3.2
debian linux = 11.0 No fix listed
netapp active iq unified manager All versions No fix listed
netapp management services for element software and netapp hci All versions No fix listed
netapp oncommand insight All versions No fix listed
netapp oncommand workflow automation All versions No fix listed
netapp ontap select deploy administration utility All versions No fix listed
netapp ontap tools All versions No fix listed
netapp snapcenter < 6.0.1 6.0.1
netapp snapmanager All versions No fix listed
netapp bootstrap os All versions No fix listed
netapp a250 firmware All versions No fix listed
netapp 500f firmware All versions No fix listed
netapp c250 firmware All versions No fix listed
netapp h300s firmware All versions No fix listed
netapp h500s firmware All versions No fix listed
netapp h700s firmware All versions No fix listed
netapp h410s firmware All versions No fix listed
netapp h410c firmware All versions No fix listed
netapp h610c firmware All versions No fix listed
netapp h610s firmware All versions No fix listed
netapp h615c firmware All versions No fix listed
Siemens simatic s7-1500 tm mfp firmware < 1.1.1 1.1.1
Siemens SIDIS Prime < 4.0.700 4.0.700
Siemens simatic s7-1500 cpu 1518-4 pndp mfp firmware >= 3.1.0, < 3.1.5 3.1.5
Siemens scalance wab762-1 firmware < 3.0.0 3.0.0
Siemens scalance wam763-1 firmware < 3.0.0 3.0.0
Siemens scalance wam766-1 firmware < 3.0.0 3.0.0
Siemens scalance wub762-1 firmware < 3.0.0 3.0.0
Siemens scalance wub762-1 ifeatures firmware < 3.0.0 3.0.0
Siemens scalance wum763-1 firmware < 3.0.0 3.0.0
Siemens scalance wum766-1 firmware < 3.0.0 3.0.0
Siemens SINEC INS < 1.0 1.0
Siemens SINEC INS = 1.0 No fix listed
Siemens SINEC INS = 1.0-sp1 No fix listed
Siemens SINEC INS = 1.0-sp2 No fix listed
Siemens SINEC INS = 1.0-sp2_update_1 No fix listed
Siemens SINEC INS = 1.0-sp2_update_2 No fix listed
Siemens sinec os < 3.1 3.1
Siemens simatic s7-1500 cpu 1518f-4 pndp mfp firmware >= 3.1.0, < 3.1.5 3.1.5
Siemens siplus s7-1500 cpu 1518-4 pndp mfp firmware >= 3.1.0, < 3.1.5 3.1.5
alpine/openssl(Alpine:v3.17) >= 3.0.0, < 3.0.14-r0 3.0.14-r0
alpine/openssl(Alpine:v3.18) >= 3.1.0, < 3.1.6-r0 3.1.6-r0
alpine/openssl(Alpine:v3.19) >= 3.1.0, < 3.1.6-r0 3.1.6-r0
alpine/openssl(Alpine:v3.20) >= 3.3.0, < 3.3.1-r1 3.3.1-r1
alpine/openssl(Alpine:v3.21) >= 3.3.0, < 3.3.1-r1 3.3.1-r1
alpine/openssl(Alpine:v3.22) >= 3.3.0, < 3.3.1-r1 3.3.1-r1
alpine/openssl(Alpine:v3.23) >= 3.3.0, < 3.3.1-r1 3.3.1-r1
alpine/openssl(Alpine:v3.24) >= 3.3.0, < 3.3.1-r1 3.3.1-r1

References